BBfA

Da das automatische Firmwareupdate der Basisboxen nicht lief,
holte ich mir beim Support Hilfe.

Hier bekam ich eine Anleitung zum manuellen update der Firmware der Basisboxen :

Perform Base station firmware update

1. Go to https://developer.valvesoftware.com/wik ... are_Update
2. Connect the base station over USB to a USB 2 port in your computer. A micro - usb cable is required.
3. Make sure that the cable is fully inserted in the plug of the base station. The housing might prevent the needed close connection
4. Power on while pushing the Mode button to get the drive "CRP DISABLD". This may require multiple attempts.
5. Find the 'lighthouse_tx' firmware directory in your OpenVR Runtime directory.For example: C:\Program Files\Steam\SteamApps\common\
   SteamVR\tools\lighthouse\firmware\lighthouse_tx
6. Select the appropriate file, suitable for your basestation model. For those with the development edition "Robin" basestations, use lighthouse_tx_robin.bin
7. Delete the firmware.bin on the "CRP DISABLD" drive (you must do this, or the next step won't work)
8. Drag the ".bin" file onto the drive (or, copy paste)
9. Power cycle the basestation to complete installation. USB is not required during reboot.