Da das automatische Firmwareupdate der Basisboxen nicht lief,
holte ich mir beim Support Hilfe.
Hier bekam ich eine Anleitung zum manuellen update der Firmware der Basisboxen :
Perform Base station firmware update
- Go to https://developer.valvesoftware.com/wik ... are_Update
- Connect the base station over USB to a USB 2 port in your computer. A micro - usb cable is required.
- Make sure that the cable is fully inserted in the plug of the base station. The housing might prevent the needed close connection
- Power on while pushing the Mode button to get the drive "CRP DISABLD". This may require multiple attempts.
- Find the 'lighthouse_tx' firmware directory in your OpenVR Runtime directory.For example: C:\Program Files\Steam\SteamApps\common\
SteamVR\tools\lighthouse\firmware\lighthouse_tx - Select the appropriate file, suitable for your basestation model. For those with the development edition "Robin" basestations, use lighthouse_tx_robin.bin
- Delete the firmware.bin on the "CRP DISABLD" drive (you must do this, or the next step won't work)
- Drag the ".bin" file onto the drive (or, copy paste)
- Power cycle the basestation to complete installation. USB is not required during reboot.